Ninja Pulse BL202NZ Owner's Manual

Contents

Ninja Pulse BL202NZ Owner's Manual Manual pdf 10 page image

9the lid with the arrow ( ) located on thebowl’s handle. (Fig. 3)7 Push down on the “PULSE” on the handleto start the appliance. (Fig. 4)NOTE: Pulse ingredients for evenchopping by pressing down in shortintervals.IMPORTANT: When using the doughblade or cookie paddle hold theappliance to secure the appliance to thecounter or table top.8 When you have reached your desiredconsistency, stop pressing the lid handleand wait for the attachment to stopturning.9 To remove the lid, pull the lid handleup to a 90° angle. Turn the bowl anticlockwise to lift off the base.(Fig. 5, Fig. 6)CAUTION: Never insert your hands in thepitcher as the blades are sharp. Alwaysuse a spatula to dislodge food that hasstuck to the sides of the pitcher.10 Make sure that the unit is unpluggedwhen not in use.IMPORTANT: Make sure that the motorbase is plugged in for use.1 Place the motor base on a clean, dry,level surface such as a counter or tabletop.2 Align and lower the bowl onto the motorbase. (Fig. 1) Handle should be alignedslightly to the left of the “LOCK” symbolon the motor base.3 Rotate the container to the left as far asit will go to lock in place. (Fig. 1)4 Holding the desired attachment by theshaft, place it onto the drive gear insidethe container. Ensure that the attachmentis seated properly and is standingupright. (Fig. 2)NOTE: The blade will fit loosely on thedrive gear.5 Add the ingredients to the bowl, makingsure that they do not exceed the highestmeasured marking line on the side of thebowl.6 Holding the lid by the handle in theupright position, place it on top of thebowl aligning the arrow ( ) located onAssembly and Use for the BowlFig. 4 Fig. 5 Fig. 6Fig. 2Fig. 1ShaftFig. 3OrASSEMBLY PULSE REMOVALIt’s best to add the liquid ingredients first and then the dry ingredients.BL202NZ_30_IB_ENG_120626_3.indd 9 12-06-26 12:57 PM