Ninja QB1004 Owner's Manual

Also see for Master Prep QB1000 series: Owner's guide Owner's guide

Contents

91-877-646-52886 Review warning and caution statements on page8 before proceeding to number 7.7 Place the Master Pod on top of the pitcher splashguardmaking sure that it is securely in place. (fig. 4) DONOT attempt to operate the appliance without thesafety splashguard in place.8 To start the appliance, plug the power cord into theelectrical outlet, securely hold Master Pod whileoperating and press on the On/Off pulse button locatedon the top of the power head. (fig. 5)9 Hold the Ninja® Master Prep® Professional pitcherfirmly while depressing the On/Off pulse button toensure the unit stays in place.NOTE: DO NOT operate the appliance continuously formore than 15 seconds at a time.10 To stop the appliance, remove your fingers from the On/Off pulse button.10 In order to obtain a better quality of chopping, operatethe appliance by using the “pulse” method.12 Make sure that the Blade Assembly has stoppedcompletely before removing the Master Pod.13 If the ingredients stick to the side of the Master PrepProfessional pitcher, stop the appliance, remove theMaster Pod and the splashguard. Use a spatula todislodge the pieces and then replace the splashguardand the Master Pod. Continue processing.14 Depending on the consistency of the contents, use thepouring spout to empty liquid contents.15 For thicker consistencies, first remove the pitchersplashguard. Then, carefully remove the BladeAssemblies by the top of the shaft. Place bladeassemblies away from the work area to avoid accidentalcontact. Finally, empty contents from the pitcher.HINTS & TIPS FOR USING YOUR NINJAMASTER PREP PROFESSIONAL• To crush ice into snow, start by using short pulses tobreak up large chunks. Continue until snow is achieved.Fig. 4 Fig. 5Assembly and Use of the Pitchers - cont.