Ninja Ultima BL810UK Owner's Manual

Contents

Ninja Ultima BL810UK Owner's Manual Manual pdf 6 page image

8 90800 862 0453 w w w . n i n j a k i t c h e n . e uUsing the Ninja Ultima™ Dual Stage BlenderPLEASE KEEP THESE IMPORTANTSAFEGUARDS IN MIND WHEN USINGTHE APPLIANCE:IMPORTANT: When using the top blades,always add the ingredients into theblender AFTER inserting the top blades.CAUTION: Blades are sharp! Use extremecaution when handling the top blades.Always hold them by the shaft.IMPORTANT: DO NOT attempt tooperate the appliance without the lid on.IMPORTANT: Never run the applianceempty.CAUTION: DO NOT process food orliquids that are hot. Allow hot ingredientsto cool before processing.WARNING: Secure the appliance while inuse by pressing down on the lid with onehand.CAUTION: Never remove either containeror try to remove the lid from the pitcherwhile the appliance is still running.WARNING: Never leave the applianceunattended while in use.Fig. 3bFig. 2Fig. 1Assembly and Use for the 2.1 L PitcherIMPORTANT: Make sure that the motorbase is plugged in for use.1 Place the motor base on a clean, dry, levelsurface such as a counter or table top.2 Align and lower the pitcher onto the motorbase. (Fig. 1) Handle should be alignedslightly to the right of the “LOCK” symbol onthe motor base.3 Rotate the pitcher clockwise as far as it willgo to lock in place. (Fig. 2)NOTE: The pitcher can be placed on the motorbase two ways; the handle can be on the frontright corner or the front left corner. (Fig. 3a,Fig. 3b)4 Holding the top blades by the top of the shaft,place it onto the bottom blades inside thepitcher. Ensure that the top blades are seatedproperly by standing upright in the pitcher. Donot operate the unit if the top blades are notupright at any time. (Fig. 4)NOTE: The top blades will fit loosely on thebottom blades but will be secured once the lidis in place.TIP: When pureeing, use only the bottomblades for best results.NOTE: The bottom blades are not removable.5 When using the top blades, ensure blades areproperly in place prior to adding ingredients.Add the ingredients to the pitcher, makingsure that they do not exceed the 2.1 L mark onthe pitcher.NOTE: When blending any kind of liquids,such as mixtures of any drinks or smoothies,do not exceed the “MAX LIQUID” mark (1.8 L)on the pitcher.NOTE: If you need to add additionalingredients while the appliance is processing,do not remove the lid. Open the pour spoutcap and add any additional ingredients, closecap when complete.6 Holding the lid by the handle in the uprightposition, place it on top of the pitcher aligningthe arrow ( ) located on the lid with thearrow ( ) located on the pitcher’s handle.(Fig. 5) Press the handle down until you heara click.Fig. 4Fig. 5AssemblyFig. 3aBEFORE FIRST USE1 Remove all packaging material and labelsfrom the appliance.2 Wash the lids, pitcher, single serve cups andtop blades in warm, soapy water with a softcloth. Use caution when washing theremovable top blades as the blades arevery sharp. Rinse and dry thoroughly.OR3 All accessories are dishwasher safe exceptthe motor base. When using the dishwasher,place the pitcher and single serve cups in thedishwasher. Place the lids and attachmentson the top rack. Use caution when washingthe removable top blades as the bladesare very sharp. Always hold the top bladesfrom the shaft.4 Wipe the motor base clean with a damp cloth.Do not submerge the motor base in water orany other liquid.