8 TOLL FREE: 1-800-798-7398Fig. 6Using the Ninja® Warrior™ Processing BowlFig. 5CAUTION: Blades are sharp! Use extremecaution when handling the blades.Always hold the blade assembly by theshaft.IMPORTANT: Do not use the blendingshaft in the processing bowl.IMPORTANT: Never run the applianceempty.1 Place the processor bowl on a clean, dry,level surface.2 Holding the blade by the shaft, place itonto the spindle pin inside the processorbowl. (Fig. 5)IMPORTANT: Place the blade inside thecontainer carefully as blades are sharp.WARNING: DO NOT try to place theblade onto the power head and then intothe processor bowl.3 Add the ingredients to the processorbowl. Make sure your total of ingredientsdon’t exceed the highest measuredmarking line on the side of the container.IMPORTANT: Never add ingredients intothe processor bowl before placing theblades in first.4 Place the gear box into position on topof the processor bowl. (Fig. 6) Rotate tolock. (Fig. 7)5 Place the power head on top of the gearbox and turn it counter clockwise tomatch the arrows and lock it into place.(Fig. 8)6 For best results when chopping, pulsethe power button.7 To remove the power head, turn itclockwise to unlock. Rotate the gear boxto unlock. Remove the gear box and thechopping blades carefully. Then removethe ingredients from the bowl.IMPORTANT: It is not recommended tooperate the appliance continuously formore than 2 minutes at a time.In order to obtain a betterquality of chopping, operatethe unit by using a “Pulse”method.Fig. 7 Fig. 8NJ200_30_IB_ENG_110112.indd 8 11-01-12 11:01 AM