Nintendo RVLSWC Operation Manual

Also see for Wii U: Operation manual Important information Supplementary guide Operation manual Operation manual

Contents

Nintendo RVLSWC Operation Manual Manual pdf 10 page image

120V AC outletDC Input ConnectorWii AC Adapter1. Insert the DC plug on the Wii AC Adapter cord into the DC input connector on theback of the console.2. Insert the AC plug into a 120V AC wall outlet. Make sure the power is off (thePower LED is red) when unplugging the AC Adapter.CAUTION: To prevent electric shock, match the wide blade of the plug to thewide slot and insert fully into outlet.Sensor Bar cable positionIf desired, the Sensor Bar cable can be fed through a channel on the bottom of theSensor Bar to orient the cable to the left or right.NONO NOYESUsing the Sensor Bar StandCommunication between the Wii Remote and the Sensor Bar may be improved in some situations by mounting the Sensor Bar on the Sensor Bar stand; for example, if the TV issitting on the floor.Be sure to:• Align the center of the Sensor Bar with the center of the TV.• Align the front of the Sensor Bar with the front edge of the TV, or with the front edge ofthe surface that the TV is sitting on.S y s t e m S e t u pSystem SetupSystem Setup16 171. Remove the protective film from the foam padson the bottom of the Sensor Bar stand.2. For additional stability, you can add adhesive backed foam tape from the supplied sheet. These can be appliedto both the top and bottom of the stand.3. If you are using the extra foam tape,remove the protective film from thepiece on the top of the Sensor Bar stand.The Sensor Bar Stand can also be used on top of the TV if part of the TV blocks, orprevents proper installation of, the Sensor Bar.Make sure the Sensor Bar is horizontaland it is not blocked by the TV.4. Attach the Sensor Bar stand to the Sensor Bar, aligning the pegson the stand with the holes in the bottom of the Sensor Bar.5. Mount the Sensor Bar stand to:• the front edge of the surface the TV is sitting on, or• to the top of the TV.Do not place the Sensor Bar stand below thesurface that the TV is sitting on; for example, onshelves below the TV.ii Operations Manual48Hx210W