NISTA DEVICES GmbH 2013 © All Rights Reserved1Nista Devices Technical Support:+41 55 5085814support@nistadevices.comDocumentation on all Nista Devices GmbH products can be found on thewebsite - http://www.nistadevices.com/1 How to connect a door lock with an ownpower supplyIP394X Door Phones use a voltage free relays to control external devices like electrical door locks.Relays contacts ‘REL1’ and ‘REL2’ pins can be in Normally Open (NO) or Normally Closed (NC)states. ‘Normally Open (NO)’ state means the disconnected voltage free loop between ‘REL1/2’pins and ‘Normally closed (NC)’ state means closed loop between ‘REL1/2’ pins.The NO/NC state specified by NC/NO jumper positionNote:The Relay 2 (REL2) works only in ‘Normally Open’ mode.

power supply

Nista Devices IP394X Quick Start Manual

Introduction

IP Door Phone package content

IP Door Phone Front Panel

IP Door Phone main functionality

Installation

Connections

Reset device to Factory Default Configuration

Programming

Home screen

Network Parameters

Network -> HTTPS activation

Network / NAT Traversal

Auto Provision

SIP Parameters

SIP Audio Codecs

SIP advanced settings

Telephony

Day and Night settings

Speed Dial and System subscribers table

Door Functions

Door Access Codes

Sensor

System Parameters

Video

Video Stream capturing by using the VLC software

HTTP Video Stream

LED Display Settings

Administration Parameters

Restore Configuration

Firmware Update

Firmware local update

Set to Default

Change WEB Administrator login credentials

Syslog server settings

Export Syslog as Database file

Ping Test

User Operations

Serial Door Opening

Peer-to-Peer Calls

Speed dialing by using the SPD code

Setting the maximum conversation time

Case Opening Alarm

IPScan' Utility

Technical specification

IP 39-4X