Nitecore SRT6i User Manual
      |
3. Please use the battery magazine when using 2 xCR123 batteries.4. CAUTION! Possible dangerous radiation! Don't lookinto the light! May be dangerous for your eyes.5. When the power level is low, please stop usingthe product and replace or recharge the batteryto prevent damage to the battery.6. When the product is kept in a backpack or leftunused for prolonged time, please remove allbatteries to prevent accidental activation orbattery leakage.Tactical Momentary IlluminationBrightness Level 1-3: When the light is off, halfpress and hold the Power Button to turn on thelight momentarily. Release to turn it off.TAC Mode:• Half press and hold the Power Button to accessLOW Level momentarily. Release to turn it off.• Full press and hold the Power Button to accessTURBO Level momentarily. Release to turn it off.On / OffBrightness Level 1-3:• When the light is off, full press the Power Buttonto turn it on.• When the light is on, full press the Power Buttonto turn it off.Brightness Level or Mode SelectionWhen the light is on, rotate the Smart SelectorRing at the end of the flashlight to select abrightness level / mode.• Rotate the Smart Selector Ring clockwise from thefar right to the left to cycle through the followingbrightness levels / modes: TAC – TURBO (3) –MID (2) – LOW (1) – Lockout Mode.• These brightness levels / modes can be cycledthrough in reverse by rotating the SmartSelector Ring counterclockwise.• When rotating the Smart Selector Ring to theLockout Mode, both buttons will be locked andunavailable to turn on the flashlight.Direct Access to TURBO• When the light is off, half press and hold theMODE Button (STROBE READY™) to accessTURBO. Release to turn it off.• Brightness Level 1-2: When the light is on,half press and hold the MODE Button (STROBEREADY™) to access TURBO. Release to returnto the previous status.Note: The TURBO Level will produce massive heatwhen activating for extended periods, and theflashlight will automatically step down a few lumensto prevent overheating and prolong battery life.STROBE READY™• When the light is off, full press and hold theMODE Button (STROBE READY™) to access theSTROBE Mode. Release to turn it off.• Brightness Level 1-3: When the light is on,full press the MODE Button (STROBE READY™)to access the STROBE Mode. Short pressingthe MODE Button (STROBE READY™) again toreturn to the previous status or turning off theflashlight can exit the STROBE Mode.Power Indication• When the light is on and the remaining batterypower is approx. 50%, the power indicator willflash once every 2 seconds to inform the user.• When the light is on and the remaining batterypower is nearly depleted, the power indicator willflash quickly and continuously to inform the user.Battery ReplacementThe battery should be replaced when the powerindicator flashes quickly and continuously and theoutput appears to be dim or the flashlight becomesunresponsive due to low power.ATR (Advanced TemperatureRegulation)The integrated ATR technology regulates theoutput of the SRT6i according to the workingcondition and ambient environment to maintainthe optimal performance.MaintenanceEvery 6 months, threads should be wiped with aclean cloth followed by a thin coating of silicon-based lubricant.Warnings1. Please recharge the product every 3 monthswhen left unused for a prolonged time.2. When the flashlight is kept in the backpack orthe holster, please select the Lockout Mode toprevent accidental activation.3. Dispose of the device/batteries in accordancewith applicable local laws and regulations. |
Related manuals for Nitecore SRT6i
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine