Nitto AJC-16 Instruction Manual
                  | |
4INSTRUCTIONSFORTHIS TOOLAbout Your ToolWARNING● Wear protective glasses and a dustproof mask.Operation generates chips and dust particles, etc.which may cause eye and / or respiratory injury:Always use PPE (Personal Protective Equipment)for eye and respiratory protection.● Wear vibration reducing and shock absorbinggloves.This is a power tool utilizing vibration. Wear vibrationreducing and shock absorbing gloves. When yourhands, fingers, arms, etc. feel discomfort duringoperations, immediately stop your work. Long houroperation should be prohibited, for it may causeVibration-induced disorder.● Always wear suitable hearing protection.The tool generates loud noise. Always use ear plugsfor hearing protection. Take necessary measures tocomply with the local regulatory requirements andlaws with regard to noise level, or do better.● Do not operate tool at no Ioad.Do not operate the tool at no load: It may not onlyCause damage to the tool but also may causeNeedles to fracture and fly out, possibly resulting inunexpected accident.1. USAGE● Remove slag and spatter from welding.● Perform shot peening after welding.● Remove rust, paint, cast sand from irregular metalsurface.● Peel off adhered concrete. Clean brick surfaces andstone structures.● The tool is used for operations in the difficult-to-operate areas where no other tool would be feasible :in narrow difficult-to-reach areas, extremely irregularsurfaces, and grooves, cracks and other exteriorsurfaces without containers, etc.2. CHECK THE CONTENTS OF THE PACKAGECheck the contents and make sure that the tool doesnot have any damage which may have occurredduring transportation. The contents should correspondto the list as follows. In case of damage/missingparts, please contact the sales agent from whom youpurchased the tool.AJC-16Package Contents Qty CheckAJC-16 1setO.D.3×180mm;(on tool) 3O.D.3×180mm 3Bushing R3/8×NPT3/8 1Hose Nipple R3/8×3/8 1Instruction Manual 1Declaration of Conformity 1Caution for Use 1JC-16Package Contents Qty CheckJC-16 1setNeedle O.D.2×150mm;(on tool) 29Needle O.D.2×150mm 29Bushing R3/8×NPT3/8 1Hose Nipple R3/8×3/8 1Instruction Manual 1Declaration of Conformity 1Caution for Use 1JT-20Package Contents Qty CheckJT-20 1setNeedle O.D.3×180mm;(on tool) 12Needle O.D.3×180mm 12Bushing R3/8×NPT3/8 1Hose Nipple R3/8×3/8 1Instruction Manual 1Declaration of Conformity 1Caution for Use 1JEX-20Package Contents Qty CheckJEX-20 1setNeedle O.D.3×180mm;(on tool) 12Needle O.D.3×180mm 12Bushing R3/8×NPT3/8 1Hose Nipple R3/8×3/8 1Instruction Manual 1Declaration of Conformity 1Caution for Use 1JEX-24Package Contents Qty CheckJEX-24 1setNeedle O.D.3×180mm;(on tool) 23Hex. Socket Screw Key 6 1Bushing R3/8×NPT3/8 1Hose Nipple R3/8×3/8 1Instruction Manual 1Declaration of Conformity 1Caution for Use 1JET CHISEL.indd 4 11.2.18 2:12:23 PM |
manualsdatabase
Your AI-powered manual search engine