6EN5 PreparationAttaching a bitWARNINGz Before attaching or detaching a bit, always turn OFF the power.1 Insert a bit while pulling the sleeveSleevePull the sleeveBit2 Release the sleeve and make sure the bit doesnot come offTo remove the bit, pull out the bit while pulling thesleeve.Attaching the suspension bailCAUTIONz If the suspension bail is pulled forcefully, it may not return to original status. Use an appropriate strengthnecessary for attachment or removal.1 Lightly pull both sides of the suspension bail and fit it intothe holeHole

instruction manual

Product Specific Safety Rules

Application

Part Names

Specifications

Torque scale and output torque

Preparation

Replacing a torque spring

Attaching the Pistol Grip

Notes on attaching a commercially available fixing jig

Basic Operation

Changeover switch

Screw tightening

Appendix

Maintenance and inspection

Separately-sold products

External dimensions

Nitto Kohki DLV30A Instruction Manual

DLV30A

DLV45A

DLV70A