Nitto Kohki DLV30A06L-SP Instruction Manual

Nitto Kohki DLV30A06L-SP Instruction Manual Manual pdf 4 page image

2EN1 ApplicationThis is a hand-held electric screwdriver used to tighten screws.The tool is equipped with an environmentally-friendly brushless motor.Features differ depending on the model type. For identification of model, see p. 1.Features of the SP typeThis type is a signal output driver with an addition of start signal, torque-up signal, and reverse rotation signal (photocoupler output) that can be available for security against forgetting to tighten screws. When the reverse rotation signal is added to the start signal and torque-up signal, this is effective in controllingthe number of screws to be tightened and also can be used to reset the count by using this reverse-rotation signalwhen screw tightening has failed and the screw must be loosened by reverse rotation. Each output signal is a photo coupler output that does not require an external power supply and auxiliary circuit.Thus, it can be directly connected to the sequencer, etc. and facilitates signal processing. The driver power supply is insulated from the output signals by a photo coupler, ensuring safety.Features of the SPC typeThis tool is only for screw fastening counter DLR5040A-WE and DLR5340-WE. Use it in combination with the screwfastening counter.For how to use the screw fastening counter, refer to the instruction manual of the screw fastening counter.2 Checking Inside the PackageWhen you open the package box, check the content of the package and also check for any damage caused byincidents during transportation.If a problem is found, consult with the store where you purchased the product.Package content and list of accessoriesDLV30A series DLV45A series / DLV70A seriesPackage content and accessories Quantity Package content and accessories QuantityElectric screwdriver (main unit) 1 Electric screwdriver (main unit) 1Bit NK35 (No.2×7×75) (HEX 5 mm) * 1Bit NK31 (No.2×6×70) (HEX 6.35 mm) * 1 1 Bit NK35 (No.2×7×75) (HEX 6.35 mm) 1Suspension Bail 1Low Torque Spring 1 Pistol Grip DLW2300 1High Torque Spring * 2 1 Instruction Manual 4Suspension Bail 1Instruction Manual 4*1 Bits differ depending on the model. Please refer to p. 3.*2 The high torque spring is built inside the main unit at the factory default.White paintLow Torque Spring6.357579hexagon width across flatsPhillips No.2Bit NK35 (No.2×7×75)High Torque Spring*570614hexagon width across flatsPhillips No.2Bit NK31 (No.2×6×70)