Nixie Clock DA-2000 Operating Instructions Manual

Nixie Clock DA-2000 Operating Instructions Manual Manual pdf 16 page image

If you have the module connected to the clock, you should get a time update after a maximumof two minutes. The module will disconnect you from it.Note: The time you get will be the time in Central Europe by default! Don’t worry, you canchange this right away!See the section about “setting the time” for more information.How to access the module after WiFi set upOnce the module is set up, you will need to log into it to configure the time server and set theconfiguration of the clock. The module has an in-built web server, and you can configure it (andyour clock) using a browser.Note: The web interface only starts to be available when the clock is running in normal timemode. It is not available in “Test Mode”!Accessing the clock using mDNSThe clock registers on your network with a unique address. You can use a browser to directlyaccess the clock if you know the address. The address of a clock never changes.If you don’t know the address of the clock, you can get it from in these ways:• read it from the display of the clock by using the “temporary display”, by pressing thebutton with short presses until you see the “ESPID”.• From the packing slip we sent with the clock.• From the summary page as “Clock Name”.Page 16