GB 4Remote controlRemote controlThis section describes how to operate the Mediamaster using the buttons on the remote control.The cursor buttonlPress once to turn the sound off/on (mute).Press and hold for a few seconds to switch theMediamaster into standby mode. In addition, press thisbutton to switch the Mediamaster on.back To go back one level at a time within menusselect To confirm the selection of a highlighted item.info To display brief and detailed information (if transmitted) aboutcurrent and forthcoming programmes0 - 9 To change the channel and to select individual menu options.NOTE: If 0 is entered as the first digit, the TV Releasefunctionality is activated (see below).0 To toggle between the 110 T and any equipment connected tothe TV Scart; e.g., a VCR or satellite receiver.opt To display temporary settings options while watching TV.When a TV or Radio channel has been highlighted with the NaviBars, press this button to get technical information about thechannel.txt Press to enter Teletext (if available).Cursor downMove down in the menusand change to the previouschannel in viewing mode.Cursor rightMove right/change settings inmenus.Increase the volume level inviewing mode.Cursor upMove up in the menus andchange to the next channelin viewing mode.Cursor leftMove left/change set-tings in menus.Decrease the volumelevel in viewing mode.