Nokia 1202 User Manual

Also see for 1202: User guide User guide User guide Service manual

Contents

Nokia 1202 User Manual Manual pdf 6 page image

Press the release button (1), slide the back cover upwards (2), and remove it.This phone is intended for use with the BL-4C battery.Always switch the device off and disconnect the charger before removing the battery.Insert the SIM card and battery1. Lift the battery, and remove it (1).2. Insert the SIM card (2). Ensure that the gold-coloured contact area is facing downand the bevelled corner of the SIM card is slided in next.3. Replace the battery and back cover (3, 4).Remove the SIM cardPress the release spring (1) and slide out the SIM card (2).Charge the battery1. Connect the charger to a wall outlet.2. Connect the charger to the phone. The battery indicator bar startsscrolling. When the battery is fully charged, the bar stops scrolling.Tip: To save energy, unplug the charger when the battery is fullycharged.If the battery is completely discharged, it may take a few minutes before the chargingindicator appears on the display or before any calls can be made.Switch on and offPress and hold the end key.Use the phone only in its normal operating position.Your device may have internal and external antennas. As with any radiotransmitting device, avoid touching the antenna area unnecessarily whilethe antenna is transmitting or receiving. Contact with such an antenna affects thecommunication quality and may cause the device to operate at a higher power levelthan otherwise needed and may reduce the battery life.Get started© 2008 Nokia. All rights reserved.6