6. Line up the battery contacts, and put the battery in.7. Replace the back cover.Remove the SIM cardOpen the back cover, remove the battery, press the release spring, and slide the SIM out.Remove the memory cardOpen the back cover, remove the battery, and pull the memory card out.Switch your phone onPress and hold the power key.Charge the batteryYour battery has been partially charged at the factory, but you may need to recharge it before youcan use your phone.1. Plug the charger into a wall outlet.2. Connect the charger to the phone. When done, unplug the charger from the phone, then from thewall outlet.If the battery is completely discharged, it may take up to 20 minutes before the charging indicatoris displayed.Tip: You can use USB charging when a wall outlet is not available. Data can be transferred whilecharging the device. The efficiency of USB charging power varies significantly, and it may takea long time for charging to start and the device to start functioning.Make sure your computer is switched on.© 2014 Microsoft Mobile. All rights reserved. 6