Use only compatible memory cards approved for use with this device. Incompatible cards maydamage the card and the device and corrupt data stored on the card.1. Press the release button, and lift and remove the back cover.Note: Switch the device off and disconnect the charger and any other device before removingany covers. Avoid touching electronic components while changing any covers. Always store anduse the device with any covers attached.2. Push the card in with the contact area face down until it locks into place.3. To remove, push the card in, until it is released.Important: Do not remove the memory card when an app is using it. Doing so may damage thememory card and the device and corrupt data stored on the card.Charge the batteryYour battery has been partially charged at the factory, but you may need to recharge it before youcan use your phone.1. Plug the charger into a wall outlet.© 2014 Microsoft Mobile. All rights reserved. 8