S e t t i n g s32 Copyright © 2005 Nokia. All rights reserved.4. Select one of the followingsequence types:Access no. + phone no. + card no.—Dial the 1-800 access number,phone number, then enter the cardnumber (plus PIN if required).Access no. + card no. + phone no.—Dial the 1-800 access number, cardnumber (plus PIN if required), thenenter the phone number.Prefix + phone no. + card no.—Dialthe prefix (numbers that mustprecede the phone number) andphone number, then enter the cardnumber (plus PIN if required).5. Enter the required information(access number or prefix and cardnumber), and select OK to confirmyour entries.6. Select Card name, enter the cardname, and select OK.Make callsAfter you have saved your calling cardinformation in your phone, make a callwith your calling card.1. In the standby mode, selectMenu > Settings > Call settings >Calling card.2. Enter your security code, andselect OK. See “Lock code”, p. 39.3. Scroll to the calling card of yourchoice, select Options > Select >OK.4. Press the end key to return tostandby mode, and enter the phonenumber, including any prefix(such as 0 or 1) that your callingcard may require when you make acalling card call. See your callingcard for instructions.5. Press and hold the call key for a fewseconds until Card call is displayed.6. When you hear the tone or systemmessage, select OK.Data and fax callsData or fax calls is a network service.See "Network services", p. viii.If your wireless network operatorsupports this feature, you can set upthe device to send or receive data orfax calls when a terminal, such as aPDA or PC, is connected.For better performance during datacalls, place the device on a stationarysurface. Do not move the device byholding it in your hand during a datacall.For more information on connectivity,see the PC/PDA Connectivity Guide.The PC/PDA Connectivity Guide can bedownloaded from the Nokia web siteat http://www.nokia-asia.com.1. In the standby mode, select Menu> Settings > Call settings > Data/fax calls > Incoming data/fax calland one of the following options: