M e s s a g e s31Call and setup your voice mail1. After you save the voice mailbox number, press and hold 1.2. When you connect to voice mail and the prerecorded greeting begins, followthe service’s automated instructions to setup your voice mail.Listen to your voice messagesTo dial the voice mailbox number and listen to your voice messages, perform oneof the following:• Dial the number using the keypad.• Press and hold 1.• If there is a notification message in the display, select Listen.• In the standby mode, select Menu > Messages > Voice messages > Listen tovoice messages.Once you connect and the prerecorded greeting begins, follow the automatedinstructions to listen to your voice messages.Automate voice mailSpecial characters, called dialing codes, can be added to phone numbers. Dialingcodes instruct the receiving system to pause, wait, bypass, or accept the numbersthat follow them in the dialing string. See "Insert dialing codes," p. 32.Voice mail services vary by service provider. The following instructions areexamples of common operations. Please check with your service provider forspecific instructions for using your voice mail service.Set up voice mail with dialing codes1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Keep inmind that each voice mail service may vary. However, it should be similar tothe following:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,press #.4. In the standby mode, select Contacts > 1-touch dialing.5. Scroll to an (empty) 1-touch dialing slot and select Assign.