Nokia 22 Operator's Manual
Also see for 22: Product guideUser guideUser guide
                                                      | |
Contents
| 
Setting up the terminal©2001 Nokia Mobile Phones. All rights reserved. 183. Setting up the terminalBefore the Nokia 22 PBX connectivity terminal can be used it must be installedproperly.In the following instructions it is assumed that the PIN code request and theAutoPIN feature are active.To use the Nokia 22 for the first time, proceed as follows:1 Install the SIM card.2 Mount the GSM terminal on the application module.3 Connect the power supply to the terminal and to an AC wall outlet.4 Connect a DTMF telephone to the terminal.5 Enter the PIN code if your SIM card requires it.6 Check the signal strength.7 Install the external antenna.8 Make test calls.Warning! Do not connect the power supply to an AC wall outlet beforeyou have installed the SIM card and mounted the GSM terminal on theapplication module.Installing the SIM cardIf the SIM card has not been installed, install it.Insert the SIM card ensuring that the goldencontact area is facing downwards.Note: Keep SIM cards always out of the reach of small children.The cardcan be damaged by scratching or bending so it must be handledcarefully. |
Related manuals for Nokia 22
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine