60 Copyright © 2003 NokiaAssign a key to 1-touch dialing1 Press Contacts, scroll to 1-touch dialing and press Select.2 Scroll to a number that has the message (empty) and press Assign.3 Scroll to the name and number to which you want to assign this key andpress Select.Repeat steps 1-3 times as many times as necessary.4 To call a number using 1-touch dialing, press and hold the appropriate key fora few seconds.Change 1-touch dialing numbersYou can change the 1-touch dialing key assignments at any time.1 Press Contacts, scroll to 1-touch dialing, and press Select.2 Scroll to the key you want to change and press Options.3 Scroll to Change and press Select.4 Scroll through the contact list until you reach the new number you want toselect and press Select.Delete 1-touch dialing numbersYou can delete 1-touch dialing key assignments at any time.1 Press Contacts, scroll to 1-touch dialing and press Select.2 Scroll to the key you want to delete and press Options.3 Scroll to Delete, press Select, then press OK.• SET TOUCH TONE STRINGSYour phone allows you to create special sets of numbers known as touch tonestrings which will dial a series of digits after a “wait” or a “pause.” For example,you can program your phone to send your account number while you are bankingby phone.You must be in the mode to enter these characters. Enter the numbersas usual. When you want to insert the special characters, press * repeatedly toswitch among *, +, p, w characters.Note: Use caution when sending confidential information, if voice privacyis not active.
