38 Copyright © 2004 Nokia• 1-TOUCH DIALINGYou can assign a name from your contact list to a 1-touch dialing location, using keys 2–9. (The 1 key is used exclusively to dial your voice mailbox.) Once assigned, the phonenumber you associate with that key is dialed automatically when you press and hold the key.Assign a 1-touch key1 At the start screen, select Contacts > 1-touch dialing.2 Scroll to a number that has the message (empty) and select Assign.3 Select the name and number to which you want to assign this key.4 To call a number using 1-touch dialing, press and hold the appropriate key for afew seconds.Change numbers1 At the start screen, select Contacts > 1-touch dialing.2 Scroll to the key you want to change and select Options > Change.3 Scroll through the contact list and select the new number.Delete numbers1 At the start screen, select Contacts > 1-touch dialing.2 Scroll to the key you want to delete and select Options > Delete > OK.• TOUCH TONE STRINGSYour phone allows you to create special sets of numbers known as touch tone strings whichwill dial a series of digits after a “wait” or a “pause.” For example, you can program your phoneto send your account number while you are banking by phone.You must be in the mode to enter these characters. Enter the numbers as usual.When you want to insert the special characters, press * repeatedly to switch among *, +, p,w characters.Note: Use caution when sending confidential information, if voice privacy is notactive.p Creates a pause when a number is dialed. The numbers you enter after this specialcharacter are automatically sent as touch tones after a 2.5-second pause.w Creates a wait when a number is dialed. This means that your phone waits for you topress the left selection key before it sends the number as touch tones.* Sends command strings to the network. Contact your service provider for details.+ Links a 1-touch dialing number to a number in the contact list.