Phone cannot be powered on (II)ContextIf this kind of failure is presenting itself immediately after FLALI, it is most likely caused by ASIC's missingcontact with PWB.If the MCU doesn’t service the watchdog register within the UEMCLite, the operations watchdog will run outafter approximately 32 seconds. Unfortunately, the service routine can not be measured.Troubleshooting flowFigure 10 Troubleshooting when phone does not stay on or phone is jammedRM-298; RM-299Baseband Troubleshooting InstructionsIssue 1 COMPANY CONFIDENTIAL Page 3 –7Copyright © 2007 Nokia. All rights reserved.
