Nokia Customer Care Service Software InstructionsCompany Confidential RH-75Issue 2 06/2005 2005 Nokia Corporation. Page 39Windows will detect connected USB cable and detect drivers for new HW.Follow the instructions and allow Windows to search and install the best drivers avail-able. After this procedure the actual JBV-1 SW update can begin.Updating the JBV-1 docking station softwareThe next step is to install or update the JBV-1 USB drivers which are delivered with theJBV-1 SW installation package. They can be found in folder:C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driverIf there is no previously installed JBV-1 Firmware update package installed on your com-puter, Windows will detect connected USB cable and detect drivers for new HW. You willbe prompted about this, please follow the instructions and allow Windows to search andinstall the best Drivers available.If there is a previously installed JBV-1 Firmware update package (v 17 or older) on yourcomputer, please update the JBV-1 USB Driver. Please see the readme.txt – file underC:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver – folder for instruc-tions on how to update the JBV-1 USB Driver.After you have installed or updated the JBV-1 USB driver, the actual JBV-1 SW updatecan begin.Go to folder C:\Program Files\Nokia\JBV-1 Firmware Update\JBV-1 Firmware Update andstart JBV-1 Update SW by double clicking fwup.exe.
