nokiaC ONNECTING PEOPLE PAGE 17 (24) Approved 3.0CMO Operations & Logistics MGRCMO OL WW Service Solutions & DevelopmentBochum / Germany CONFIDENTIAL 10.2.200510. DOMESHEET EXCHANGE INSTRUCTIONS1.) Take care not to damage the LED’s when exchangingthe Domesheet. Start with SRT-6 as shown in thepicture.2.) Tweezers can be used to remove the defectiveDomesheet.3.) Take the new Domesheet with tweezers. 4.) Place the Domesheet in the Key Dome Shield (C-1Cover).5.) Place the Domesheet straps into the slot of the KeyDome Shield.6.) Same procedure on the opposite side.7.) Make sure that the edges and the screw holes ofDomesheet and the Key Dome Shield (C-1Cover) arecongruent to each other.8.) Place the Key Dome Shield (C-1Cover) with theDomesheet on the Engine Module exactly and press-onthe Domesheet carefully. Check if the Domesheet iscorrectly stuck to the Engine Module.Service Manual 2650/2651 Level 1&2 Copyright © 2004-2005 Nokia Corporation. All rights reserved.