Get startedInstall SIM card and batterySafe removal. Always switch the device off and disconnect the charger before removingthe battery.The SIM card and its contacts can be easily damaged by scratches or bending, so becareful when handling, inserting, or removing the card.1 Press and slide the back cover towards the bottom of the phone, and remove it (1).2 Remove the battery (2).3 Open the SIM card holder (3), insert the SIM card with the contact surface facingdown (4), and close the holder (5).4 Insert the battery (6), and replace the back cover (7).Charge the batteryYour battery has been partially charged at the factory. If the device indicates a lowcharge, do the following:1 Connect the charger to a wall outlet.2 Connect the charger to the device.3 When the device indicates a full charge, disconnect the charger from the device,then from the wall outlet.You do not need to charge the battery for a specific length of time, and you can use thedevice while it charges. If the battery is completely without charge, it may take severalminutes before the charging indicator appears on the display or before any calls can bemade.Get started 5