You can search for a name or phone number that you have saved in Contacts. See "Search for a contact," p. 22. Press the callkey to call the number.To access the list of dialed numbers, press the call key once in the standby mode. To call the number, select a number or name,and press the call key.Dialing shortcutsAssign a phone number to one of the number keys, 2 to 9. See "Dialing shortcuts," p. 23.Call the number in one of the following ways:Press a number key, then the call key.ORIf Speed dialling is set to On, press and hold a number key until the call begins.Further details are described in Speed dialling. See "Call," p. 27.Enhanced voice dialingYou can make a phone call by saying the name that is saved in the contact list of the device.Voice commands are language-dependent. Set the Voice recognition language before using voice dialing. See"Phone," p. 27.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solelyupon voice dialing in all circumstances.1. In the standby mode, press and hold the right selection key or the volume down key. A short tone sounds, and Speaknow is displayed.2. Speak the name of the contact you want to dial clearly. If the voice recognition is successful, a list with matches is shown.The device plays the voice command of the first match on the list. If it is not the correct command, scroll to another entry.Using voice commands to carry out a selected device function is similar to voice dialing. See "Voice commands," p. 25.Answer or reject a callTo answer an incoming call, press the call key. To end the call, press the end key.To reject an incoming call, press the end key. To mute the ringing tone, select Silence.To answer a waiting call during an active call (network service), press the call key. The first call is put on hold. To end the activecall, press the end key. You may also activate the Call waiting function. See "Call," p. 27.Options during a callMany of the options that you can use during a call are network services. For availability, contact your service provider.During a call, select Options and from the following options:Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice clarity, Loudspeaker or Handset.Network options are Answer or Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following:• Send DTMF — to send tone strings• Swap — to switch between the active call and the call on hold• Transfer — to connect a call on hold to an active call and disconnect yourself• Conference — to make a conference call• Private call — to have a private discussion in a conference callWarning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremelyloud.5. Write textText modesTo enter text (for example, when writing messages) you can use traditional or predictive text input.When you write text, press and hold Options to toggle between traditional text input, indicated by , and predictive textinput, indicated by . Not all languages are supported by predictive text input.W r i t e t e x t© 2007 Nokia. All rights reserved. 13