Set up a Bluetooth connectionSelect Menu > Settings > Connectivity > Bluetooth and from the followingoptions:• Bluetooth — Select On to activate the Bluetooth function. indicates thatBluetooth is activated.• My phone's visibility — to define how your device is shown to otherBluetooth devices• Search for audio enhancements — to search for compatible Bluetoothaudio devices. Select the device that you want to connect to the phone.• Active devices — to check which Bluetooth connection is currently active• Paired devices — to search for any Bluetooth device in range. Select Newto list any Bluetooth device in range. Select a device and Pair. Enter an agreedBluetooth passcode of the device (up to 16 characters) to pair the device toyour device. You must only give this passcode when you connect to the devicefor the first time. Your device connects to the other device, and you can startdata transfer.• My phone's name — to set the device name for Bluetooth connectionsIf you are concerned about security, turn off the Bluetooth function, or set Myphone's visibility to Hidden. Always accept only Bluetooth communicationfrom others whom you trust.Packet dataGeneral packet radio service (GPRS) is a network service that allows mobiledevices to send and receive data over an internet protocol (IP)-based network.To define how to use the service, select Menu > Settings > Connectivity >Packet data > Packet data connection and from the following options:• When needed — to set the packet data connection to established when anapplication needs it. The connection will be closed when the application isterminated.• Always online — to set the device to automatically connect to a packet datanetwork when you switch the device on.S e t t i n g s55CyanCyan MagentaMagenta YellowYellow BlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 55 May 8, 2007 4:09:52 PM