Nokia Customer Care Disassembly3155/3155i (RM-41), 3152 (RM-61)ISSUE 1 07/2005 ©2005 Nokia Corporation Company Confidential Page 3Safety InformationAdhere to the following guidelines when assembling and disassembling the phone.• QUALIFIED SERVICEOnly qualified personnel may install or repair phone equipment.• ACCESSORIES AND BATTERIESUse only approved accessories and batteries. Do not connect incompatibleproducts.• CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user’s guide for detailed safetyinstructions. Do not connect incompatible products.ESD ProtectionNokia requires that phone repair centers have sufficient ESD protection against staticelectricity when servicing cellular phones. Use the following guidelines:• A cellular phone that is ready for use can be handled normally without ESDprotection. The battery can be replaced in normal conditions of use.• Use ESD protection when replacing a color cover, except for the phone coverswhich can be replaced by the customer.• All electronic parts of the phone, including the display, are susceptible to ESD.Resistors also can be damaged by static electricity discharge.• All ESD-sensitive parts must be packed in metallized protective bags duringshipping and handling outside any ESD Protected Area (EPA).• Every repair action involving opening the phone or handling the phonecomponents must be done under ESD protection.• ESD-protected spare part packages MUST NOT be opened/closed outside an EPA.For more detailed information about ESD protection and EPAs, contact your local NokiaCustomer Care representative.