time. The timer continues to run and the split time appears below the runningtime. Each time you select Split, the new measured time appears at thebeginning of the list.Lap timing — You can use the lap time function when you want to track howlong it takes to complete each cycle or lap. Select Lap to note the lap time. Theclock stops, then starts immediately from zero. The lap time appears below therunning time. Each time you select Lap, the new measured time appears at thebeginning of the list.2. Select Stop to end the timing and display the total time or Stop > Options >Start or Reset to continue or reset timing.Lap and split timesTo save a time while the clock is running, select Stop > Save, enter a name for themeasurement, and select OK. If you do not enter a name, the total time is used asthe default title for the lap or split time.To view a saved time, in standby mode, select Menu > Organiser > Stopwatch >Show last or View times.9246705_en_1_web.fm Page 116 Friday, December 30, 2005 12:10 PM
