44USB data cableYou can use a USB data cable to transfer data between the phone and a compatiblePC or a printer supporting PictBridge. You can also use the USB data cable withNokia PC Suite.To activate the phone for data transfer or image printing, connect the data cable.Confirm USB data cable connected. Select mode. and select from the following options:Nokia mode — to use the phone to interact with applications on a PC that hasNokia PC SuitePrinting & Media — to use the phone with a PictBridge compatible printer, or toconnect the phone to a PC to synchronize it with Windows Media Player (music, video)Data storage — to connect to a PC that does not have Nokia software and use thephone as a data storageTo change the USB mode, select Menu > Settings > Connectivity > USB datacable > Nokia mode, Printing & Media, or Data storage.■ CallSelect Menu > Settings > Call and from the following options:Call forwarding — to forward your incoming calls (network service). You may notbe able to forward your calls if some call restriction functions are active. See Callrestrictions in "Security," p. 46.Anykey answer > On — to answer an incoming call by briefly pressing any key, exceptthe power key, the camera key, the left and right selection keys, or the end keyAutomatic redial > On — to make a maximum of 10 attempts to connect the callafter an unsuccessful call attemptVoice clarity > Active — to enhance speech intelligibility especially innoisy environments1-touch dialing > On — to dial the names and phone numbers assigned to thespeed-dialing keys 2 to 9 by pressing and holding the corresponding number keyCall waiting > Activate — to have the network notify you of an incoming callwhile you have a call in progress (network service). See "Call waiting," p. 21.Summary after call > On — to briefly display the approximate duration and cost(network service) of the call after each callSend my caller ID > Yes — to show your phone number to the person you are calling(network service). To use the setting agreed upon with your service provider, selectSet by network.Answer when fold is opened > On — to answer an incoming call by opening the fold