[ 61 ]OrganizerNote: A subtotal is shown after you enter the next operant (+, -, *, or /).6 For a total, press Options twice.7 To start a new calculation, press and hold Clear for two seconds.Note: This calculator has limited accuracy and rounding errors may occur, especially inlong divisions.• STOPWATCHYou can use your phone’s Stopwatch feature to time an event in hours, minutes and seconds.The event’s time can be saved, viewed, or deleted.Warning! Your phone must be switched on to use this function. Do not switch thephone on when wireless phone use is prohibited or when it may cause interferenceor danger.Important: Using the stopwatch consumes the battery and the phone's operating timewill be reduced. Be careful not to let it run in the background when performing otheroperations with your phone.Time an event using split timingThe split time function allows you to measure the total time for an event, yet allows you tocapture the elapsed time at various intervals. To measure split time:1 From the Organizer menu, scroll to Stopwatch and press Select.2 Scroll to Split timing, then press Select.3 Press Start. The running time appears on the display.Once the split timer has started, you can:• Press Split. The split time is displayed and the timer continues to display elapsed time.• Press Stop to stop the timer and view the total elapsed time.If you continue pressing Split, the most recent split time appears at the top of the list of splittimes. You can scroll to review previous times.View timing optionsOnce you have stopped timing an event (using lap or split), you have the option to save theinformation, reset the stopwatch, or continue timing (split timing only).While stopwatch is running, press Stop, then press Options. Select one of the following:• Save - used to save the current timing data. Enter a name, then press OK.• Reset - clears the current timing data and resets the timer.• Start -restarts the split timer from the point the timer was stopped.Time an event using lap timingThe lap time function allows you to measure the amount of time it takes to complete a cycleor lap. To measure lap time:
