Section 2: Understanding Your Phone16 2A: Your Phone - The BasicsIf your phone is unable to find a signal after 15 minutes of searching, aPower Save feature is automatically activated. When a signal is found,your phone automatically returns to Standby mode.In Power Save mode, your phone searches for a signal periodicallywithout your intervention. You can also initiate a search forservice by pressing any key (when your phone is switched On).Note: The Power Save feature helps to conserve your battery power whenyou are in an area where there is no signal.Switching Your Phone OffPress for two seconds until you see “Goodbye” on the display screen.Your screen remains blank while your phone is Off (unless you arecharging the battery).Using the Battery and ChargerBattery CapacityYour phone is equipped with a Lithium Ion (Li-Ion) battery that isrechargeable. The battery provides approximately 2.5 hours ofcontinuous digital talk time (up to one hour in analog mode) orapproximately 168 hours (almost 7 days) of continuous digital standbytime (up to one day in analog mode).When the battery charge is getting low, the “Battery low. Pleaserecharge.” message is displayed on your screen, and the phone sounds awarning tone. When the battery has become too weak to further operatethe phone, the message “Switching off. Please recharge.” is displayed onyour screen.Note: Backlighting, searching for service, and vibrate mode use reducethe battery’s talk and standby times.Tip: Be sure to charge your phone’s battery, and watch the batterystrength indicator to ensure that the levels are okay.
