[ 32 ]4 Call waiting: (system service)The system will notify you of a new incoming call while you have a call inprogress. Select Activate to request the system to activate call waiting,Cancel to request the system to deactivate call waiting, or Check status, tocheck if the function is active or not.Automatic redialWhen this setting is activated, your phone will make a maximum of tenattempts to connect the call after an unsuccessful call attempt. Pressto stop automatic redialing.Summary after callActivate this setting if you want the phone to briefly display the durationand cost of the last call. To show costs, the Call cost limit needs to beactivated for your SIM card.1-touch dialingSelect On and the numbers assigned to the 1-touch dialing keys ( - ),can be dialed by pressing and holding the key.Anykey answerSelect On, and you can answer an incoming call by briefly pressing anykey, except , , and .Line in use (system service)This setting is shown only if the SIM card supports two subscriber numbers,that is, two phone lines. Select which phone line (Line 1 or Line 2) you wantto use for making calls and sending text messages. Calls on both lines canbe answered irrespective of the selected line.Note: You will not be able to make calls if you select Line 2 and have notsubscribed to this system service.To prevent line selection, select Line change→ Disable if supported by yourSIM card. To change this setting, you need the PIN2 code supplied by yourservice provider.Tip: To switch between the phone lines, press and hold in standby mode.
