[ 115 ]the network.• Message sent as - The options are Text, Fax, Paging, and E-mail. Forfurther information, contact your network operator.Note: Change this option only if you are sure that your service center isable to convert short messages into these other formats.• Preferred connection - You can send short messages via the normalGSM network or via GPRS, if supported by the network. See ‘Packetdata (General Packet Radio Service, GPRS)’, p. 30.• Reply via same ctr. (network service) - By setting this option to Yes, ifthe recipient replies to your message, the return message is sent usingthe same short message service center number. Note that this maynot work between all operators.ADD A NEW SHORT MESSAGE CENTER1 Open Message centers and select Options→ New msg. center.2 Press , write a name for the service center and press OK.3 Press , press and write the number of the short messageservice center (Must be defined). Press OK. You need the messagecenter number to send short and picture messages. You can get thenumber from your service provider.To use the new settings, go back to the settings view and scroll toMsg. center in use. Press and select the new service center.Settings for multimedia messagesGo to Messaging and select Options→ Settings→ Multimedia message toopen the following list of settings:• Preferred connection (Must be defined) - Select which access point isused as the preferred connection for the multimedia message center.See ‘Settings needed for multimedia messaging’, p. 65.Note: If you receive multimedia message settings in a smart messageand save them, the received settings are automatically used forthe Preferred connection. See ‘Receiving smart messages’, p. 71.
