Copyright © 2003 Nokia. All rights reserved.Your phone20Tip! To adjust thephone tones for differentenvironments and events,for example, when youwant your phone to besilent, see ‘Profiles’, p. 99.Note: It is possible that the phone assigns a wrong name for the phone number.This happens if the phone number of the caller is not stored in Contacts but theseven last digits of the number match another number that is stored in Contacts.In this case, call identification is not correct.Call waiting (network service)Tip! To end bothcalls at the same time,select Options→ End allcalls and press OK.If you have activated the Call waiting service, the network will notify you of a newincoming call while you have a call in progress. See ‘Call waiting: (network service)’, p. 29.1 During a call, press to answer the waiting call. The first call is put on hold.To switch between the two calls, press Swap.2 To end the active call, press .Options during a callMany options that you can use during a call are network services. Press Options duringa call for some of the following options:Mute or Unmute, End active call, End all calls, Hold or Unhold, New call, Conference, Private,Drop participant, Answer, and Reject.Swap is used to switch between the active call and the call on hold.Transfer is used to connect an incoming call or a call on hold with an active call and todisconnect yourself from both calls.Send DTMF is used to send DTMF tone strings, for example, passwords or bank accountnumbers.Glossary:DTMF tones are the tones you hear when you press the number keys onthe phone keypad. DTMF tones allow you to communicate with voice mailboxesand computerised telephony systems, for example.1 Key in the digits with - . Each keystroke generates a DTMF tone, which istransmitted while the call is active. Press repeatedly to produce: *, p (inserts aFig. 3 Options during acall.
