S e t t i n g s35Paired devices — Search for any Bluetooth device in range. Select New to list anyBluetooth device in range. Select a device, and Pair. Enter an agreed Bluetoothpasscode of the device (up to 16 characters) to associate (pair) the device to yourdevice. You must only give this passcode when you connect to the device for thefirst time. Your device connects to the device, and you can start data transfer.Active devices — View a list of active devices to which you have an activeconnectionMy phone's visibility — Select your device’s visibility to other devices.My phone's name — Change the name of your device, which is visible to otherbluetooth devices.Bluetooth wireless connectionSelect Menu > Settings > Connectivity > Bluetooth. To check which Bluetoothconnection is currently active, select Active devices. To view a list of Bluetoothdevices that are currently paired with the device, select Paired devices.Bluetooth settingsTo define how your device is shown to other Bluetooth devices, select Menu >Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name.If you are concerned about security, deactivate the Bluetooth function, or selectMy phone's visibility > Hidden. Only connect to devices, or let other devicesconnect to you, if you have agreed so with the owner of the other device.Packet dataGeneral packet radio service (GPRS) is a network service that allows mobile devicesto send and receive data over an internet protocol (IP)-based network.To define how to use the service, select Menu > Settings > Connectivity > Packetdata > Packet data connection and from the following: