Using Nokia Network Voyager to Manage Your 500s ApplianceNokia 500s Installation Guide 51 To connect Ethernet devices, use a straight-through RJ-45 cable toconnect to a 10-Mbps or 100-Mbps hub.For details, see “Ethernet NIC Connectors and Cables” on page 71. To connect Gigabit Ethernet devices, use a fiber-optic cable with an LCconnector for each NIC interface. The destination end of the cable can beeither LC or SC, depending on the type of connector required for thedestination Gigabit Ethernet device.For details, see “Fiber-Optic Gigabit Ethernet NIC Connectors andCables” on page 74.Using Nokia Network Voyager to Manage Your500s ApplianceUse Nokia Network Voyager to configure and monitor your 500s appliance.For additional information about how to use Network Voyager, see“Accessing Nokia Network Voyager Reference Information” and “NokiaNetwork Voyager Inline Help” on page 53.To open Nokia Network Voyager1. Start a Web browser on the host you plan to use to configure or monitoryour appliance.2. In the Location or Address field, enter the IP address of the initialinterface you configured for the appliance.You are prompted to enter the admin username and the password youentered when you performed the initial configuration.For more information, see the section in the appropriate installation guideabout entering passwords.NoteIf the username login screen does not appear, you might not have aphysical network connection between the host and your appliance, or you
