Nokia 5100 User Manual

Also see for 5100 - Cell Phone 725 KB: User guide User guide User guide

Contents

M e n u f u n c t i o n s69• The user of the sending phone selects the desired IR function tostart data transfer.If data transfer is not started within two minutes after the activationof the IR port, the connection is cancelled and has to be startedagain.IR connection indicator• When is shown continuously, the IR connection is activatedand your phone is ready to send or receive data via its IR port.• When blinks, your phone is trying to connect to the otherdevice or a connection has been lost.GPRSGPRS connectionYou can set the phone to automatically register to a GPRS networkwhen you switch the phone on. Press Menu, and select Connectivity,GPRS, GPRS connection and Always online. Starting a WAP or PC dial-up application, or sending/receiving multimedia messages creates theconnection between phone and network and data transfer is possible.When you end the application, GPRS connection is ended but theregistration to the GPRS network remains.If you select When needed, the GPRS connection is established whenan application needs it and closed when you end the application.GPRS modem settingsYou can connect the phone via infrared or data cable connection to acompatible PC and use the phone as a modem to enable GPRSconnectivity from the PC.Press Menu, and select Connectivity, GPRS and GPRS modem settings.Select Active access point and activate the access point you want touse. Select Edit active access point to change the access point settings.• Scroll to Alias for access point and press Select. Key in the nameyou would like for the activated access point and press OK.• Scroll to GPRS access point and press Select. Key in the AccessPoint Name (APN) and press OK.