1. Open the cover of the memory card slot.2. Insert the card into the memory card slot with the contact surface facing up,and press until it locks into place.3. Close the cover of the memory card slot.Remove the microSD cardImportant: Do not remove the memory card in the middle of an operationwhen the card is being accessed. Removing the card in the middle of an operationmay damage the memory card as well as the device, and data stored on the cardmay be corrupted.You can remove or replace the memory card during phone operation withoutswitching the device off.1. Ensure that no application is currently accessing the memory card.2. Open the cover of the memory card slot.3. Press the memory card slightly in to release the lock, and remove it.4. Close the cover of the memory card slot.Charge the batteryYour battery has been precharged, but the charging levels may vary.1. Connect the charger to a wall outlet.2. Connect the charger to the device. You can use your devicewhile it is charging.3. When the battery is fully charged, disconnect the charger fromthe device, then from the wall outlet.If the battery is completely discharged, it may take several minutesbefore the charging indicator appears on the display or before any calls can bemade.AntennaYour device may have internal and external antennas. As with any radiotransmitting device, avoid touching the antenna area unnecessarilywhile the antenna is transmitting or receiving. Contact with such anantenna affects the communication quality and may cause the device10CyanCyan MagentaMagenta YellowYellow BlackBlack