Nokia 5210 NSM-5 Service Manual

Contents

PAGE 2 (19) Approved 1.0Nokia Mobile Phones Customer Care E&A SQX –00380-en MWyTechnical Services, Repair Concepts Confidential 13.02.2002IntroductionThe purpose of this document is to give Nokia service level 1 workshops aids to carry outservice for 5210. The use of this Service Manual is only for Nokia authorized servicepartners additionally to other service documentation like Service Bulletins.While every endeavor has been made to ensure the accuracy of this document, someerrors may exist. If you find any errors or if you have further suggestions, Nokia shouldbe notified. Please keep in mind also that this documentation is continuously beingupdated and modified, so watch always out for the newest version.Warnings and CautionsPlease refer to the phone’s user guide for instructions relating to operation, care and maintenanceincluding important safety information. Note also the following:Warnings:1. CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINEMANAGEMENTSYSTEMS AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RFENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLEDEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RFENERGY.2. THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAINPOTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREASETC.3. OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAYINTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT APHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHERELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE.Cautions:1. Servicing and alignment must be undertaken by qualified personnel only.2. Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap isworn.3. Ensure solder, wire, or foreign matter does not enter the telephone as damage may result.4. Use only approved components as specified in the parts list.5. Ensure all components, modules screws and insulators are correctly re–fitted after servicing andalignment. Ensure all cables and wires are repositioned correctly.6. All PC’s used with NMP Service Software for this produce must be bios and operating system ”Year2000 Compliant”.Service Manual 5210 Level 1 Copyright 2002 © Nokia Corporation