©2002 Nokia Corporation. All rights reserved. 89Menu functions Making a connection to a WAP serviceFirstly, make sure that the connection settings of the WAP service you want to use are activated.To activate the settings:1. Press Menu, select Services, and then Settings.2. Scroll to Connection settings, select the appropriate settings group and press Options.3. Select Activate.Secondly, make a connection to the WAP service. Select one of the three options:• Open the homepage of the WAP service:Press Menu, select Services, and then Home.Tip: In the standby mode you can quickly access the homepage of WAP service by pressing andholding .• Select a bookmark of the WAP service:Press Menu, select Services, and then Bookmarks. Scroll to the bookmark you want to use and pressOptions. Select Go to.If the bookmark does not work with the current active service settings, Check service settings isdisplayed. Activate another set of connection settings and try again. Or:• Key in the address of the WAP service:Press Menu, select Services, and then Go to address. Key in the address (press for specialcharacters) of the WAP service and press OK.Note that it is not necessary to add the prefix in front of the address, such as http://, since it will beadded automatically. If you are using a protocol other than http, add the appropriate prefix.
