Nokia 5230RM-588 / RM-593 / RM-594 / RM-629Service Manual Level 1&219 Confidential • Copyright © 2010 NOKIA • All rights reserved Version 8.010. ASSEMBLY HINTS1) Start assembling the device from the A-COVER.Note that the microphone hole is located in thebottom end of the A-COVER.2) Place the TOUCH PANEL ASSY to the A-COVER. Startfrom the top side of the TOUCH PANEL ASSY andmake sure it is correctly placed under the A-COVERclips.3) Lower down the bottom end of the TOUCH PANELASSY.4) Remove the protective film from the TOUCHFRAME ASSY.5) Align the TOUCH FRAME ASSY on top of the A-COVER. Start attaching the TOUCH FRAME ASSY fromthe top side clips.6) Press down the four shown clips carefully to lockthe TOUCH FRAME ASSY on its place.