S e t t i n g s43Automatic keyguard — to lock the keypad automatically after a preset time delaywhen the phone is in the standby mode and no function of the phone has beenused. Select On, and set the time.Welcome note — to write the note that is shown when the phone is switched onFlight query > On — The phone asks every time when it is switched on whether theflight profile shall be used. With flight profile all radio connections are switchedoff. The flight profile should be used in areas sensitive to radio emissions.Phone updates — to receive phone software updates from your service provider(network service dependency). This option may not be available, depending onyour phone. See “Phone software updates,” p. 45.Operator selection > Automatic — to set the phone to automatically select oneof the cellular networks available in your area. With Manual you can select anetwork that has a roaming agreement with your service provider.Confirm SIM actions — See “SIM services,” p. 65.Help text activation — to select whether the phone shows help textsStart-up tone > On — The phone plays a tone when it is switched on.■ EnhancementsThis menu or the following options are shown only if the phone is or has beenconnected to a compatible mobile enhancement.Select Menu > Settings > Enhancements. Select an enhancement, and dependingon the enhancement, from the following options:Default profile — to select the profile that you want to be automatically activatedwhen you connect to the selected enhancementAutomatic answer — to set the phone to answer an incoming call automaticallyafter 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answeris off.Lights — to set the lights permanently On. Select Automatic to set the lights onfor 15 seconds after a key press.TTY/TDD > Use TTY > Yes — to use the text phone settings instead of headset orloopset settings■ ConfigurationYou can configure your phone with settings that are required for certain servicesto function correctly. Your service provider may also send you these settings. See“Configuration settings service,” p. 10.
