Care and maintenanceYour device is a product of superior design and craftsmanship and should be treatedwith care. The following suggestions will help you protect your warranty coverage.● Keep the device dry. Precipitation, humidity, and all types of liquids or moisture cancontain minerals that will corrode electronic circuits. If your device does get wet,remove the battery, and allow the device to dry completely before replacing it.● Do not use or store the device in dusty, dirty areas. Its moving parts and electroniccomponents can be damaged.● Do not store the device in hot areas. High temperatures can shorten the life ofelectronic devices, damage batteries, and warp or melt certain plastics.● Do not store the device in cold areas. When the device returns to its normaltemperature, moisture can form inside the device and damage electronic circuitboards.● Do not attempt to open the device other than as instructed in this guide.● Do not drop, knock, or shake the device. Rough handling can break internal circuitboards and fine mechanics.● Do not use harsh chemicals, cleaning solvents, or strong detergents to clean thedevice.● Do not paint the device. Paint can clog the moving parts and prevent properoperation.● Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, andlight sensor lenses.● Use only the supplied or an approved replacement antenna. Unauthorized antennas,modifications, or attachments could damage the device and may violate regulationsgoverning radio devices.● Use chargers indoors.● Always create a backup of data you want to keep, such as contacts and calendar notes.● To reset the device from time to time for optimum performance, power off the deviceand remove the battery.These suggestions apply equally to your device, battery, charger, or any enhancement.If any device is not working properly, take it to the nearest authorized service facilityfor service.DisposalThe crossed-out wheeled-bin symbol on your product, literature, or packagingreminds you that in the European Union all electrical and electronic products,batteries, and accumulators must be taken to separate collection at the end oftheir working life. Do not dispose of these products as unsorted municipal waste.Return the products to collection to prevent possible harm to the environment or humanhealth from uncontrolled waste disposal and to promote the sustainable reuse ofmaterial resources. Collection information is available from the product retailer, localwaste authorities, national producer responsibility organizations, or your local Nokia