11G e t s t a r t e d■ Switch the device on and offPress and hold the power key.If the device asks for a PIN code, enter the PIN code, and selectOK.If the device asks for the lock code, enter the lock code, and selectOK. The factory setting for the lock code is 12345.For more information about access codes, see “Access codes,”p. 16.To set the correct time zone, time, and date, select the countryyou are presently in, then enter the local time and date. See also“Clock,” p. 47.Welcome applicationThe Welcome application starts when you switch on your device for the first time.With the Welcome application, you can access the following applications:Sett. wizard — Configure connection settings. See “Settings wizard,” p. 12.Switch — Copy or synchronise data from other compatible devices.To open Welcome later, select > Help > Welcome.Antenna locationsCellular antenna (1)Bluetooth antenna (2)Your device may have internal and external antennas. Aswith any radio transmitting device, avoid touching theantenna area unnecessarily while the antenna istransmitting or receiving. Contact with such an antennaaffects the communication quality and may cause the deviceto operate at a higher power level than otherwise needed andmay reduce the battery life.■ Configuration settingsBefore you can use multimedia messaging, e-mail,synchronisation, streaming, and the browser, you must have the properconfiguration settings on your device. Your device may automatically configurebrowser, multimedia messaging, access point, and streaming settings based onthe SIM card used. If not, you can use the setting wizard application to configure