being accessed. Doing so may damage thememory card and the device, and corruptdata stored on the card.You can remove or replace the memorycard without switching the device off.1 Ensure that no application is currentlyaccessing the memory card.2 Open the cover of the memory cardslot.3 Press the memory card slightly in torelease the lock, and remove the card.Charge the batteryYour battery has been partially charged atthe factory. If the device indicates a lowcharge, do the following:1 Connect the charger to a wall outlet.2 Connect the charger to the device.3 When the device indicates a fullcharge, disconnect the charger fromthe device, then from the wall outlet.You can also charge the battery with a USBcable with power from a computer.1 Connect the USB cable to a USB port ofa computer and to your device.2 When the battery is fully charged,disconnect the USB cable.You do not need to charge the battery fora specific length of time, and you can usethe device while it is charging. If thebattery is completely discharged, it maytake several minutes before the chargingindicator appears on the display or beforeany calls can be made.AntennaYour device may have internal andexternal antennas. Avoid touching theantenna area unnecessarily while theantenna is transmitting or receiving.Contact with antennas affects thecommunication quality and may cause ahigher power level during operation andmay reduce the battery life.The figure shows the antenna areamarked in grey.8 Get started8 www.nokia.com/supportCyanCyan MagentaMagenta YellowYellow BlackBlack2009-11-24 10:17:31