223. To end the call, or to cancel the call attempt, press the end key.To make a call from Contacts, select Menu > Contacts. Scroll to the desired name;or enter the first letters of the name, and scroll to the desired name. To call thenumber, press the call key.To call your call mailbox (network service), press and hold 1 in the standby mode.You must define the mailbox number before you can call your mailbox. See “Callmailbox,” p. 71.To call a recently dialed number, press the call key in the standby mode. The list ofthe last 20 numbers you called or attempted to call is shown. Scroll to the numberyou want, and press the call key.To make a push to talk call, see “Push to talk,” p. 87.Speed dialingYou can assign a phone number to one of the speed dialing keys 2 to 9. See“Assign speed dialing keys,” p. 41, or “Speed dial,” p. 72.Call a speed dialing number in either of the following ways:• Press the speed dialing key, then the call key.• If Speed dialling is set to On, press and hold the speed dialing key until the callbegins. To set Speed dialling to On, select Menu > Settings > Phone sett. >Phone > Call > Speed dialling > On.Voice dialingA voice tag is added automatically to all entries in Contacts.Use long names, and avoid similar names for different numbers.Make a voice dialing callVoice tags are sensitive to background noise. Use voice tags in a quiet environment.Note: Using voice tags may be difficult in a noisy environment or during anemergency, so you should not rely solely upon voice dialing in all circumstances.1. In the standby mode, press and hold the right selection key. A short tone isplayed, and Speak now is displayed.If you are using a compatible headset with the headset key, press and hold theheadset key.