Copyright © 2007 Nokia. All rights reserved. 33W r i t e t e x tWrite textWhen you write text, appears on the top right ofthe display, indicating predictive text input, orappears, indicating traditional text input. To set thepredictive text input on or off when writing text, press *,and select Activate predictive text or Predictive text >Off., , or is displayed next to the text inputindicator, indicating the character case. To change thecharacter case, press #.indicates the number mode. To change betweenletter and number mode, press # repeatedly until numbermode is active; or press *, and select Number mode orAlpha mode.Traditional text inputPress a number key, 1 to 9, repeatedly until the desiredcharacter appears. Not all characters available under anumber key are printed on the key. The availability ofcharacters depends on the selected writing language. SeeWriting language in “Language”, p. 77.If the next letter you want is on the same key as thepresent one, wait until the cursor appears (or scrollforward to end the time-out period), and enter the letter.To insert a number, press and hold the number key.The most common punctuation marks and specialcharacters are available under the 1 key. For morecharacters, press and hold *.To erase a character, press the clear key. To erase morecharacters, press and hold the clear key.To insert a space, press 0. To move the cursor to the nextline, press 0 three times.Predictive text inputTo enter any letter with a single keypress, use predictivetext input. To select the predictive text input, press *, andselect Activate predictive text. This activates predictivetext input for all editors in the phone.1 To write the desired word, press the keys 2–9. Presseach key only once for one letter. The word changesafter every keypress.