Select from the following:● Show WLAN availability — Select whether is displayed when a wireless LAN(WLAN) is available.Tip: To access the WLAN Wizard application and view the available options,select the WLAN icon, and in the pop-up window, select the highlighted textnext to the WLAN icon.● Scan for networks — If you set Show WLAN availability to Yes, you can selecthow often the device searches for available WLANs and updates the indicator.● Internet connectivity test — Select whether you want the device to test theinternet capability of the selected WLAN automatically, to ask for permission everytime, or to never perform the connectivity test. If you select Run automatically orallow the test to be performed when the device asks for it, and the connectivity testis performed successfully, the access point is saved to the internet destinations.To view advanced settings, select Options > Advanced settings. Changing theadvanced settings for the WLAN is not recommended.Access pointsCreate a new access pointSelect Menu > Settings and Connectivity > Destinations.You may receive access point settings in a message from a service provider. Some or allaccess points may be preset for your device by your service provider, and you may notbe able to change, create, edit, or remove them.When you open one of the access point groups ( , , , ), you can see the accesspoint types:indicates a protected access pointindicates a packet data access pointindicates a wireless LAN (WLAN) access pointTip: You can create internet access points in a WLAN with the WLAN wizard.To create a new access point, select Access point. The device asks to check foravailable connections. After the search, connections that are already available areshown and can be shared by a new access point. If you skip this step, you are asked toselect a connection method and to define the settings needed.To edit the settings of an access point, open one of the access point groups, and selectan access point. Follow the instructions from your service provider.● Connection name — Enter a name for the connection.● Data bearer — Select the data connection type.Depending on the data connection you select, only certain setting fields are available.Fill in all fields marked with Must be defined or with a red *. Other fields can be leftempty, unless your service provider has instructed otherwise.© 2009 Nokia. All rights reserved. 73
