1 — Capture mode indicator2 — Audio mute on indicator3 — Video stabilisation on indicator4 — Active toolbar (not displayed during recording).5 — Battery charge level indicator6 — Video quality indicator. To change this setting, select Options > Settings > Videoquality.7 — Video clip file type8 — Available recording time. When you are recording, the current video lengthindicator also shows the elapsed and remaining time.9 — The location to which the video clip is saved.10 — GPS signal indicator.10. Positioning (GPS)You can use applications such as Maps and GPS data to find out your location, or measuredistances and coordinates. These applications require a GPS connection.About GPSThe coordinates in the GPS are expressed in degrees and decimal degrees format usingthe international WGS-84 coordinate system.The Global Positioning System (GPS) is operated by the government of the United States,which is solely responsible for its accuracy and maintenance. The accuracy of locationdata can be affected by adjustments to GPS satellites made by the United Statesgovernment and is subject to change with the United States Department of Defense civilGPS policy and the Federal Radionavigation Plan. Accuracy can also be affected by poorsatellite geometry. Availability and quality of GPS signals may be affected by yourlocation, buildings, natural obstacles, and weather conditions. The GPS receiver shouldonly be used outdoors to allow reception of GPS signals.Any GPS should not be used for precise location measurement, and you should neverrely solely on location data from the GPS receiver and cellular radio networks forpositioning or navigation.To enable or disable different positioning methods, such as Bluetooth GPS, selectMenu > Applications > Location and Positioning > Positioning methods.Positioning (GPS)26