M e s s a g e s ( M e n u 1 )26 Copyright © 2004 Nokia. All rights reserved.2. When you connect to voice mailand the prerecorded greetingbegins, follow the service’sautomated instructions to setupyour voice mail.Listen to your voicemessagesOnce you have setup voice mail, youcan dial the voice mailbox number inone of four ways:• Dial the number using thekeypad.• Press and hold 1 .• Press Listen if there is anotification message in thedisplay.• In the standby mode, select Menu> Messages > Voice messages >Listen to voice messages.Once you connect and theprerecorded greeting begins,follow the automatedinstructions to listen to yourvoice messages.Automate voice mailYou can insert special characterscalled dialling codes into phonenumbers such as voice mail, andsave the number to a speed diallinglocation. Dialling codes instruct thereceiving system to pause, wait,bypass, or accept the numbers thatfollow them in the dialling string.Note: Voice mail servicesvary by service provider. Thefollowing instructions areexamples of commonoperations. Please check withyour service provider forspecific instructions for usingyour voice mail service.Write down voice mailboxnumber and process1. Write down your voice mailboxnumber.2. Call and check your voice mail asyou normally would.3. Write down your interaction withthe recorded prompts step-by-step. Keep in mind that eachvoice mail service may vary.However, it should looksomething like this:Dial 083210, pause 5 seconds,press 1.Be precise; you will need thisinformation in "Setup voice mailwith dialling codes" on page 27.Insert dialling codesPress * repeatedly to cycle throughdialling codes. Once the desired codeappears in the display, pause brieflyand the code is inserted into thedialling string.The following dialling codes areavailable:*—Bypasses a set of instructions.+—International access.